Garmin GNC 420W Pilots Guide - Page 129

SECTION 7 WPT PAGES 2) Press the ENT Key to capture the position and display the User Waypoint Page (Figure 7-41). Figure 7-41 User Waypoint Page 3) A four-digit name is automatically assigned to the waypoint. To change this name, turn the large right knob to highlight the name field, then use the small and large right knobs to select a new name. Press the ENT Key to accept the selected name. 4) The cursor moves to the 'Create?' action field. Press the ENT Key to save the new waypoint. Modifying User Waypoints To modify an existing waypoint, select that waypoint on the User Waypoint Page and enter the new position information directly over the old information. Modifying a user waypoint by changing its latitude/longitude position: 1) With the User Waypoint Page displayed, press the small right knob to activate the cursor. 2) Use the small and large right knobs to enter the name of the desired waypoint and press the ENT Key. 3) Turn the large right knob to highlight the position field at the bottom of the page. 4) Use the small and large right knobs to enter the new position coordinates (Figure 7-42) and press the ENT Key to accept the selected position. Figure 7-42 Position Field Selected 5) The cursor moves to the 'Modify?' action field. Press the ENT Key to modify the waypoint. 6) Press the small right knob to remove the flashing cursor. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 7-19