Garmin GNC 420W Pilots Guide - Page 179

SECTION 9 AUX PAGES Setup 2 Page: Data Field Configuration Configuring the Data Fields: 1) Select 'Data Field Configuration' from the Setup 2 Page, using the steps described at the beginning of this section. The flashing cursor highlights the data field (Figure 9-79). Figure 9-80 Select Field Type Window 3) Press the ENT Key to accept the data type. 4) Press the small right knob to remove the cursor and return to the Setup 2 Page. Setup 2 Page: Auxiliary Configuration Figure 9-79 Upper Data Field Highlighted 2) Turn the small right knob to select the desired data type (Figure 9-80). The available data options are listed in Table 9-3. Abbreviation Data Type BRG Bearing CTS Course To Steer DIS Distance DTK Desired Track ESA Enroute Safe Altitude ETA Estimated Time of Arrival FLOW Total Fuel Flow GS Ground Speed MSA Minimum Safe Altitude TKE Track Angle Error TRK Track VSR Vertical Speed Required WPT Active Waypoint XTK Cross Track Error Table 9-3 Configuring the Auxiliary Data Field: 1) Select 'Data Field Configuration' from the Setup 2 Page, using the steps described at the beginning of this section. Turn the large right knob to highlight the Auxiliary Configuration Field (Figure 9-81). Figure 9-81 AUX CONFIG Field Highlighted 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 9-31