Garmin GNC 420W Pilots Guide - Page 66
Selecting an on-screen waypoint as a, direct-to destination, Direct-to, right, Direct-to Key
![]() |
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
SECTION 4 DIRECT-TO NAVIGATION Shortcuts Shortcuts are available when using the Direct-to Key, allowing the pilot to bypass the use of the small and large right knobs to enter the destination waypoint's identifier. A direct-to can be performed from any page displaying a single waypoint identifier (such as the WPT pages for airports and NAVAIDs). For pages that display a list of waypoints (e.g., the Nearest Airport Page), the desired waypoint must be highlighted with the cursor before pressing the Direct-to Key. Selecting an on-screen waypoint as a direct-to destination: 1) If a single airport, NAVAID, or user waypoint is displayed on-screen (Figure 4-9): Figure 4-9 Single Waypoint Displayed a) Press the Direct-to Key b) Press the ENT Key twice. 2) If a list of waypoints is displayed on-screen: a) Press the small right knob to activate the cursor. b) Turn the large right knob to highlight the desired waypoint (Figure 4-10). Figure 4-10 Nearest List c) Press the Direct-to Key followed by the ENT Key twice. Selecting an on-screen waypoint as a direct-to destination: 1) If a single airport, NAVAID, or user waypoint is displayed on-screen: press the Direct-to Key, then press the ENT Key twice. 2) If a list of waypoints is displayed on-screen, press the small right knob to activate the cursor. 3) Turn the large right knob to highlight the desired waypoint. 4) Press the Direct-to Key followed by the ENT Key twice. 4-4 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K
![](/manual_guide/products/garmin-gnc-420w-pilots-guide-8f6f648/66.png)