Garmin GNC 420W Pilots Guide - Page 139

5) Press the COM Flip-flop Key to activate the selected frequency (Figure 8-11). SECTION 8 NRST PAGES 4) Press the ENT Key to display the Airport Location Page for the selected airport (Figure 8-13). Figure 8-11 Frequency Moved to Active Field 6) Press the small right knob to remove the flashing cursor. Additional communication frequencies, runway information, and more is available from the Nearest Airport Page by highlighting the identifier of the desired airport and pressing the ENT Key. Viewing additional information for a nearby airport: 1) Select the Nearest Airport Page, using the steps outlined in Section 8.1. 2) Press the small right knob to activate the cursor. 3) Turn the large right knob to scroll through the list, highlighting the identifier of the desired airport (Figure 8-12). Figure 8-13 Airport Location Page 5) To view additional WPT pages for the selected airport (including the Airport Runway Page and the Airport Frequency Page) press the small right knob to remove the flashing cursor. Turn the small right knob to display the additional WPT pages (Figure 8-14). When finished, press the small right knob to return the flashing cursor to the screen. Figure 8-14 Additional WPT Page 6) To return to the Nearest Airport Page, verify that 'Done?' is highlighted by the flashing cursor and press the ENT Key (or press the CLR Key). Figure 8-12 Desired Airport Highlighted 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 8-5