Garmin GNC 420W Pilots Guide - Page 113

Duplicate Waypoints Once the identifier, facility name, or location is entered, all six airport pages display information for the selected airport. When entering an identifier, facility name, or location, the GNC 420's Spell'N'Find feature scrolls through the database, displaying those waypoints matching the characters that have been entered to that point. If duplicate entries exist for the entered facility name or location, additional entries may be viewed by continuing to turn the small right knob during the selection process. If duplicate entries exist for an entered identifier, a Duplicate Waypoint Window appears when the identifier is selected (by pressing the ENT Key). Selecting a facility name or location, where duplicate entries exist: 1) Select the desired facility name or location, following the preceding steps under 'To enter a waypoint facility name or city location'. 2) When spelling the facility name or location, using the small and large right knobs, the GNC 420's Spell'N'Find feature selects the first entry (Figure 7-5) in the database based upon the characters entered up to that point. SECTION 7 WPT PAGES knob if the desired facility name or location has been scrolled past. Figure 7-6 Second Facility for Albuquerque 4) Press the ENT Key to select the desired facility name or location. 5) To remove the flashing cursor, press the small right knob. Selecting a waypoint identifier from a list of duplicates: 1) Select the desired airport or NAVAID identifier following the preceding steps under 'To enter a waypoint facility name or city location'. 2) A Duplicate Waypoints Window appears (Figure 7-7). Turn the large right knob to select the desired waypoint and press the ENT Key. Figure 7-5 First Facility for Albuquerque 3) Continue turning the small right knob to scroll through any additional database listings (Figure 7-6) for the selected facility name or location. Scroll backwards with the small right Figure 7-7 Duplicate Waypoints Window 3) To remove the flashing cursor, press the small right knob. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 7-3