Garmin GNC 420W Pilots Guide - Page 74
Flight Plan Catalog Options, Crossfilling flight plans between two, 500-Series Garmin units, right
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
SECTION 5 FLIGHT PLANS Flight Plan Catalog Options The following options (some covered on the preceding pages) are available for the Flight Plan Catalog Page: • 'Activate Flight Plan?' - Allows the pilot to select the flight plan for navigation guidance, as described previously in this section. • 'Invert & Activate FPL?' - Allows the pilot to reverse the highlighted flight plan and select it for navigation guidance, as described previously in this section. • 'Create New Flight Plan?' - Allows the pilot to create a new flight plan, as described previously in this section. • 'Crossfill?' - Allows the pilot to transfer a Direct-to destination, the active flight plan, any stored flight plan or user waypoints to a second 400/500-series Garmin unit. Some crossfill operations can be done automatically. If both units are set to 'auto', a change in the direct-to destination or active flight plan on one unit is seen on the other. For additional information, see Section 9.2, Flight Planning Page: Crossfill. Crossfilling flight plans between two 400/500-Series Garmin units: 1) Select the 'Crossfill?' option from the Flight Plan Catalog Page Menu (Figure 5-13) and press the ENT Key. Figure 5-13 Flight Plan Catalog Page Menu 2) Turn the large right knob to select the 'Method' field (Figure 5-14). Figure 5-14 Crossfill Page 3) Turn the small right knob to select 'Auto' or 'Manual' and press the ENT Key. 'Auto' automatically transfers the active flight plan or Direct-to selection to another 400/500-series Garmin unit, without user intervention. 4) If 'Manual' is selected: Turn the large right knob to select the 'Transfer' field, then turn the small right knob to select the type of information to transfer between units (active flight plan, flight plan, all user waypoints or a single user waypoint). When 'Flight Plan' or 'User Waypoint' is selected, a second field appears to the immediate right of the 'Transfer' field. Use the small and large right knobs to enter the number of the flight plan or the name of the user waypoint to be transferred. 5-6 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K