Garmin GNC 420W Pilots Guide - Page 123

SECTION 7 WPT PAGES 7.7 Airport Departure Page The Airport Departure Page (Figure 7-27) shows the available Airport Standard Instrument Departure (SID) procedures for the selected airport. Where multiple runways or transitions are associated with the departure procedure, that information may also be displayed. A map image provides a layout diagram for each departure, runway, and transition. Airport Identifier, Map Image Departure Symbol, and Type Procedure Name Runways associated with Departure Transitions Position of Current Page Current within Current Page Group Page Group Figure 7-27 Airport Departure Page Number of Pages in Current Page Group Figure 7-28 Departure Window 4) Press the ENT Key. The cursor moves to the runway field. 5) Turn the small right knob to display a window of available runways (Figure 7-29). Continue turning the small right knob to select the desired runway. 'ALL' may appear in the runway field, indicating the departure procedure applies to all runways. For airports with parallel runways, 'B' may appear at the end of the runway designation to indicate the departure procedure applies to both runways. Scrolling through the available departures: 1) Press the small right knob to activate the cursor. 2) Turn the large right knob to place the cursor on the departure (DEP) procedure name field (Figure 7-27). 3) Turn the small right knob to display a window of available departures for the selected airport (Figure 7-28). Continue turning the small right knob to select the desired departure. Figure 7-29 Runway Window 6) Press the ENT Key. The cursor moves to the transitions (TRANS) field. 7) Turn the small right knob to display a window of available transitions. Continue turning the small right knob to select the desired transition. 8) Press the ENT Key. To remove the flashing cursor, press the small right knob. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 7-13