Garmin GNC 420W Pilots Guide - Page 83
Activating a specific leg of the active flight, right, Direct-to
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
SECTION 5 FLIGHT PLANS The 'Activate Leg?' option is discussed previously in this section, which allows the pilot to specify which leg of the flight plan is used for navigation guidance. A shortcut also exists for this operation, using the Direct-to Key. Activating a specific leg of the active flight plan: 1) Press the small right knob to activate the cursor and turn the large right knob to highlight the desired destination waypoint (Figure 5-36). When using instrument procedures, this feature can be used not only to activate a specific point-to-point leg, but to also activate the procedure turn portion of an approach, follow a DME arc, or activate a holding pattern. Any approach, departure, or arrival can be reviewed on the appropriate airport page in the Waypoint Page Group (Section 7.1). Reviewing a procedure while viewing a flight plan page: 1) With a flight plan page displayed, press the small right knob to activate the cursor. 2) Turn the large right knob to highlight the procedure header (Figure 5-38) and press the ENT Key to select the WPT Page Group. Figure 5-36 Destination Waypoint Highlighted 2) Press the Direct-to Key twice to display an 'Activate Leg' confirmation window (Figure 5-37). Figure 5-38 Procedure Header Highlighted Figure 5-37 Activate Leg Window 3) With 'Activate?' highlighted, press the ENT Key. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 5-15