Garmin GNC 420W Pilots Guide - Page 78

SECTION 5 FLIGHT PLANS The data fields for DTK and DIS are user-selectable and may be changed to display cumulative distance (CUM) to each waypoint, estimated time of arrival (ETA), estimated time enroute (ETE), or enroute safe altitude (ESA). Changing a data field on the Active Flight Plan Page: 1) With the Active Flight Plan Page displayed, press the MENU Key to display the Active Flight Plan Page Menu. 2) Turn the large right knob to highlight 'Change Fields?' (Figure 5-21) and press the ENT Key. Restoring factory default settings for data fields on the Active Flight Plan Page: 1) With the Active Flight Plan Page displayed, press the MENU Key to display the Active Flight Plan Page Menu. 2) Turn the large right knob to highlight 'Restore Defaults?' and press the ENT Key. Activating a flight plan along a specific leg: 1) Press the small right knob to activate the cursor and turn the large right knob to highlight the desired destination waypoint. 2) Press the MENU Key, and select the 'Activate Leg?' option from the Active Flight Plan Page Menu (Figure 5-23) and press the ENT Key. Figure 5-21 Active Flight Plan Page Menu 3) Turn the large right knob to highlight the field to be changed. 4) Turn the small right knob to select the desired data item (Figure 5-22) and press the ENT Key. Figure 5-23 Active Flight Plan Page Menu 3) A confirmation window appears. With 'Activate?' highlighted, press the ENT Key. Figure 5-22 Select Field Type Window 5) Press the small right knob to remove the cursor. 5-10 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K