Garmin GNC 420W Pilots Guide - Page 21
COM Flip-flop, NAV/COM
![]() |
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
SECTION 1 INTRODUCTION NAV/COM Page From the Default NAV Page, turn the small right knob until the NAV/COM Page (Figure 1-21) is displayed. Departure, Enroute, or Arrival Airport Frequency List Frequency Type Figure 1-21 NAV/COM Page The NAV/COM Page displays the available frequencies (communications and navigation) for the departure airport, any enroute airports which are included in the flight plan, and the final destination airport. When using the directto function, frequencies are listed for the airport nearest to the starting position and the destination airport. Displaying the frequency list for the desired flight plan or direct-to airport: 1) Press the small right knob to activate the cursor on the airport identifier field (in the GPS Window). 2) Turn the small right knob to display the list of airports (departure, arrival, and enroute) for the flight plan or direct-to. Continue to turn the small right knob until the desired airport is selected. 3) Press the ENT Key to display the frequency list for the selected airport. A frequency listed on the NAV/COM Page can be quickly transferred to the standby field of the COM Window (NAV frequencies are shown for reference only). This time-saving process prevents having to 're-key' a frequency already displayed elsewhere on the screen. Selecting a communication frequency: 1) Press the small right knob to activate the cursor in the GPS Window. 2) Turn the large right knob to select the desired frequency from the list. 3) Press the ENT Key to transfer the selected frequency to the standby field in the COM Window. COM frequencies automatically go to the standby field of the COM Window. 4) To activate the selected frequency, press the COM Flip-flop Key. Displaying frequencies for a different airport along the flight plan. 1) Press the small right knob to highlight the airport identifier field. 2) Turn the small right knob to display the list of airports within the flight plan (Figure 1-22). Figure 1-22 Airport Window 3) Continue turning the small right knob to select the desired airport and press the ENT Key. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 1-13
![](/manual_guide/products/garmin-gnc-420w-pilots-guide-8f6f648/21.png)