Garmin GNC 420W Pilots Guide - Page 162
Utility Checklists, Creating a checklist, right knob, right
![]() |
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
SECTION 9 AUX PAGES Utility Page: Checklists Creating a checklist: 1) Select 'Checklist' from the Utility Page (Figure 9-33), using the steps described at the beginning of this section (9.3). Press the ENT Key to display a list of checklists. Executing a checklist: 1) With the Checklists Page displayed (Figure 9-34), turn the large right knob to select the desired checklist and press the ENT Key. Figure 9-33 Checklists Highlighted 2) Press the MENU Key to display an options menu. Turn the large right knob to select 'Create New Checklist?' and press the ENT Key. 3) Use the small and large right knobs to enter the name of a checklist. Press the ENT Key when finished. (Up to nine different checklists can be created and stored in the GNC 420.) 4) Use the small and large right knobs to enter each checklist item, followed each time by the ENT Key. Each checklist may contain up to 30 line items of as much as 16 characters long. Figure 9-34 Desired Checklist Highlighted 2) As each checklist item is completed, press the ENT Key to move to the next item on the list (Figure 9-35). Figure 9-35 Desired Checklist Item Highlighted Editing a checklist: 1) With the Checklists Page displayed, turn the large right knob to select the desired checklist and press the ENT Key. 2) Press the MENU Key to display an options menu. Select 'Edit Item?' and press the ENT Key, then use the small and large right knobs to edit each checklist item. Press the ENT Key when finished. 9-14 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K
![](/manual_guide/products/garmin-gnc-420w-pilots-guide-8f6f648/162.png)