Garmin GNC 420W Pilots Guide - Page 127

3) Turn the large right knob to highlight the position field at the bottom of the page. 4) Use the small and large right knobs to enter the position coordinates for the new waypoint (Figure 7-37). Figure 7-37 Present Position Field Selected 5) Press the ENT Key to accept the selected position. 6) The cursor moves to 'Create?'. Press the ENT Key to add the new waypoint to memory. 7) Press the small right knob to remove the flashing cursor. SECTION 7 WPT PAGES Creating a new user waypoint by referencing an existing waypoint: 1) With the User Waypoint Page displayed, press the small right knob to activate the cursor. 2) Use the small and large right knobs to enter a name for the new waypoint and press the ENT Key. 3) Turn the large right knob to highlight the first reference waypoint (REF WPT) field. 4) Use the small and large right knobs to enter the identifier of the reference waypoint. The reference waypoint can be an airport, VOR, NDB, intersection, or another user waypoint. Press the ENT Key to accept the selected identifier. 5) The cursor moves to the radial (RAD) field (Figure 7-38). Use the small and large right knobs to enter the radial from the reference waypoint to the new user waypoint. Press the ENT Key to accept the selected radial. 190-00140-20 Rev. K Figure 7-38 Radial Field Highlighted 6) The cursor moves to the distance (DIS) field. Use the small and large right knobs to enter the distance from the reference waypoint to the new user waypoint. Press the ENT Key to accept the selected distance. GNC 420(A) Pilot's Guide and Reference 7-17