Garmin GNC 420W Pilots Guide - Page 122
Airport Arrival Options, right, Loading an arrival procedure from
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
SECTION 7 WPT PAGES 7) Turn the small right knob to display a window of available runways (Figure 7-25). Continue turning the small right knob to select the desired runway. 'ALL' may appear in the runway field, indicating the arrival procedure applies to all runways. For airports with parallel runways, 'B' may appear at the end of the runway designation to indicate the arrival procedure applies to both runways. Figure 7-25 Runway Window Airport Arrival Page Options The following option is available for the Airport Arrival Page, by pressing the MENU Key: 'Load into Active FPL?' allows the pilot to load the selected arrival into the active flight plan. This is identical to loading an arrival procedure from the Procedures Page, as described in Section 6.1. Loading an arrival procedure from the Airport Arrival Page: 1) Select the desired arrival, transition, and runway using the steps above. 2) Press the MENU Key to display the Airport Arrival Page Menu. 3) Press the ENT Key to select the 'Load into Active FPL?' option (Figure 7-26). 8) Press the ENT Key. To remove the flashing cursor, press the small right knob. Figure 7-26 Airport Arrival Page Menu 4) The Active Flight Plan Page appears. Press the FPL Key to return to the Airport Arrival Page. 7-12 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K