Garmin GNC 420W Pilots Guide - Page 115
Airport Runway Displaying information for each additional, runway, right
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
7.3 Airport Runway Page The Airport Runway Page (Figure 7-9) displays runway designations, length, surface type, and lighting for the selected airport. A map image of the runway layout and surrounding area is also displayed on the Airport Runway Page. The map image range appears in the lower left corner and is adjustable using the RNG Key. For airports with multiple runways, information for each runway is available. Map Image Airport Identifier, Runway Designations Symbol, and Type SECTION 7 WPT PAGES Displaying information for each additional runway: 1) Press the small right knob to activate the cursor. 2) Turn the large right knob to place the cursor on the runway designation field (Figure 7-9). 3) Turn the small right knob to display a window listing all runways for the selected airport (Figure 7-10). Runway Length and Width, Current Page Surface, and Lighting Group Figure 7-9 Airport Runway Page Position of Current Page within Current Page Group Number of Pages in Current Page Group Figure 7-10 Runway Window 4) Continue turning the small right knob to select the desired runway. 5) Press the ENT Key to display information for the selected runway on the Airport Runway Page (Figure 7-11). 190-00140-20 Rev. K Figure 7-11 Airport Runway Page 6) To remove the flashing cursor, press the small right knob. GNC 420(A) Pilot's Guide and Reference 7-5