Garmin GNC 420W Pilots Guide - Page 159

4) The flashing cursor moves to the type field under the new message (Figure 9-27). Turn the small right knob to display a window of available options (Figure 9-28): Event, One Time, Periodic. Press the ENT Key to select. Figure 9-27 Type Field Highlighted Figure 9-28 Type Window 5) The flashing cursor moves to the time/date field. Use the small and large right knobs to set the time or date required before the message is displayed. Time is entered as hours/minutes/seconds (hhh:mm:ss). Eventbased messages expire at a specific date and time. Press the ENT Key when finished. SECTION 9 AUX PAGES Editing a scheduled message: 1) Select 'Scheduler' from the Flight Planning Page, using the steps described at the beginning of this section. 2) The flashing cursor highlights the first message field. 3) To edit the message text, turn the large right knob to highlight the desired message field. Use the small and large right knobs to edit the message text-entering the new text directly over the old message. Press the ENT Key when finished. 4) To edit the time field, turn the large right knob to highlight the field. Use the small and large right knobs to edit the new date or time-entering the new value directly over the old figure. Press the ENT Key when finished. Deleting a scheduled message: 1) Select 'Scheduler' from the Flight Planning Page, using the steps described in this section. 2) The flashing cursor highlights the first message field. Turn the large right knob to highlight the desired message field. 3) Press the CLR Key to delete the message text, followed by the ENT Key to confirm the deletion. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 9-11