Garmin GNC 420W Pilots Guide - Page 146

SECTION 8 NRST PAGES 3) Turn the large right knob to scroll through the list, highlighting the desired airspace (Figure 8-31). Figure 8-31 Airspace Highlighted 4) Press the ENT Key to display the Airspace Page for the selected nearby airspace (Figure 8-32). Status and Airspace Name Floor/Ceiling 'Done?' Field Time to Entry and Type Limits (Return to Previous Page) Figure 8-32 Airspace Page 5) To return to the Nearest Airspace Page, verify that 'Done?' is highlighted by the flashing cursor and press the ENT Key. 6) Press the small right knob to remove the flashing cursor. Viewing and quickly tuning the frequency for a controlling agency: 1) Follow steps 1 through 4 on the preceding page to display the Airspace Page (Figure 8-32) for the desired controlled or special use airspace. 2) Turn the large right knob to highlight 'Frequencies?' and press the ENT Key. 3) Turn the large right knob to scroll through the list, highlighting the desired frequency (Figure 8-33). Figure 8-33 Frequency Highlighted 4) Press the ENT Key to place the selected frequency in the standby field of the COM Window. 5) Press the COM Flip-flop Key to activate the selected frequency (Figure 8-34). Figure 8-34 Frequency Moved to Active Field 8-12 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K