Garmin GNC 420W Pilots Guide - Page 206

SECTION 11 ADDITIONAL FEATURES Traffic Warning Window When the unit is not on the traffic page and the GTS issues a Traffic Advisory, the Traffic Warning Window (Figure 11-26) is displayed, which shows a small thumbnail map. When the Traffic Warning Window is displayed, press the ENT Key to display the Traffic Page, or press the CLR Key to return to the previous page. NOTE: The Traffic Warning Window is disabled when the aircraft ground speed is less than 30 knots or when an approach is active. Figure 11-26 Traffic Warning Window Map Page Traffic Banner Configuring Traffic Data on the Map Page Traffic is only displayed on the Map Page if aircraft heading data is available. The Traffic Mode setting allows the operator to choose which traffic type is displayed (all traffic, traffic and proximity advisories, or traffic advisories only). The Traffic Symbol and Traffic Label settings determine the maximum ranges at which these items are displayed. Configuring traffic on the Map Page: 1) Turn the small right knob to select the Map Page. 2) Press the MENU Key to display the Page Menu. 3) Turn the small right knob to select 'Setup Map?'. 4) Press the ENT Key. The flashing cursor highlights the GROUP field. 5) Turn the small right knob to select 'Traffic'. 6) Press the ENT Key (Figure 11-28). A 'Traffic' banner will be displayed in the lower right corner of the Map Page (Figure 11-27) if the Display Range setting is beyond the Traffic Symbol setting (Figure 11-28), and a Traffic Advisory is active. Display Range Traffic Banner Figure 11-27 Traffic Banner Figure 11-28 Map Setup Menu 7) Turn the large right knob to select the desired Traffic Mode option. 8) Turn the small right knob to select the desired option. 9) Press the ENT Key. Repeat steps 7-9 for Traffic Symbol and Traffic Label. 11-16 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K