Garmin GNC 420W Pilots Guide - Page 96

SECTION 6 PROCEDURES NOTE: If the pilot needs to lose extra altitude or speed by going around the holding pattern again, press the OBS Key to manually suspend waypoint sequencing before crossing the holding waypoint the second time. If this waypoint has already been passed, re-activate the holding pattern using the steps described in Section 5.2. Refer to Figure 6-33 for the following steps. 11) When approaching BODRY intersection, a waypoint alert ('NEXT DTK 209°') appears in the lower right corner of the screen (Figure 6-34). DO NOT USE FOR NAVIGATION Figure 6-33 Approach Mode Figure 6-34 Waypoint Alert 12) At 2.0 nm from the FAF (DEPOY intersection), the GNC 420 switches from terminal mode to approach mode. CDI scaling is tightened from 1.0 to 0.3 nm, full scale deflection. 6-12 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K