Garmin GNC 420W Pilots Guide - Page 56
Restoring Factory Settings, right, Restoring the factory default settings
![]() |
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
SECTION 3 NAV PAGES 6) Press the ENT Key to select the desired type and return to the Position Page. 7) To select between 'bearing FROM' or 'bearing TO' to the reference waypoint, turn the small right knob to select the desired bearing reference (Figure 3-45) and press the ENT Key. Restoring Factory Settings A 'Restore Defaults?' option allows the pilot to reset all data fields to their original factory default settings. This returns the three user-selectable fields at the top of the page and the reference waypoint fields to default settings. Restoring the factory default settings: 1) Press the MENU Key to display the Position Page Menu (Figure 3-46). Figure 3-45 Mode Window 8) Press the small right knob momentarily to remove the cursor from the page. Figure 3-46 Position Page Menu 2) Turn the large right knob to highlight 'Restore Defaults?' and press the ENT Key. 3-22 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K
![](/manual_guide/products/garmin-gnc-420w-pilots-guide-8f6f648/56.png)