Garmin GNC 420W Pilots Guide - Page 55
right, Changing the reference waypoint, information, Menu
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5) Press the ENT Key to select the desired data item and return to the Position Page. 6) Press the small right knob momentarily to remove the cursor from the page. The Position Page also features a reference waypoint field, located at the bottom of the page, to indicate the bearing and distance to/from a selected waypoint. The reference waypoint field can display bearing and distance information for a nearby airport (default), VOR, NDB, intersection, or user waypoint. Changing the reference waypoint information: 1) Press the MENU Key to display the Position Page Menu (Figure 3-40). 2) Turn the large right knob to highlight 'Change Fields?' and press the ENT Key. 3) Turn the large right knob to highlight the waypoint type field (bottom left corner of the page; default setting shows 'APT' see Figure 3-42). SECTION 3 NAV PAGES 4) Turn the small right knob to display the list of available waypoint types (Figure 3-43). Continue turning the small right knob to select the desired data item from the list. Figure 3-43 Category Window 5) If 'WPT' is selected as the waypoint type, the pilot can designate any airport, NAVAID, or user waypoint as a reference waypoint. Press the small right knob, turn the large right knob to highlight the waypoint identifier field (Figure 3-44), then use the small and large right knobs to enter the identifier of the desired waypoint. Press the ENT Key to confirm the selected waypoints. Press the small right knob to remove the cursor. Figure 3-42 Waypoint Type Field Highlighted Figure 3-44 Reference Waypoint Field Highlighted 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 3-21