Garmin GNC 420W Pilots Guide - Page 70

SECTION 5 FLIGHT PLANS 4) A blank Flight Plan Page appears for the first empty storage location (Figure 5-4). Use the small and large right knobs to enter the identifier of the departure waypoint and press the ENT Key. Figure 5-4 Flight Plan Page 5) Repeat step 4 to enter the identifier for each additional flight plan waypoint. 6) Once all waypoints have been entered, press the small right knob to return to the Flight Plan Catalog Page. Flight Plan Editing Adding a waypoint to an existing flight plan: 1) Press the FPL Key and turn the small right knob to display the Flight Plan Catalog Page. 2) Press the small right knob to activate the cursor. 3) Turn the large right knob to highlight the desired flight plan and press the ENT Key. 4) Turn the large right knob to select the point to add the new waypoint. If an existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint (Figure 5-5). Figure 5-5 Flight Plan Page 5) Use the small and large right knobs to enter the identifier of the new waypoint and press the ENT Key (Figure 5-6). Figure 5-6 Waypoint Identifier Field Selected 6) Once all changes have been made, press the small right knob to return to the Flight Plan Catalog Page (Figure 5-7). Figure 5-7 Edited Flight Plan Page 5-2 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K