Garmin GNC 420W Pilots Guide - Page 180
right, Restoring a Setup 2 option to the original, factory settings
![]() |
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
SECTION 9 AUX PAGES 2) Turn the small right knob to select an option from the Auxiliary Configuration Window (Figure 9-82). Figure 9-82 AUX CONFIG Window 3) Selecting 'Config Fields' configures the data field to display user selectable data information. Selecting 'Traffic' configures the data field to display thumbnail traffic information (Figure 9-83). Press the ENT Key to accept the Auxiliary Configuration selection. Restoring Factory Settings When making changes to any Setup 2 Page option, a 'Restore Defaults?' menu selection restores the original factory settings (for the selected option). Restoring a Setup 2 option to the original factory settings: 1) Select the desired menu option from the Setup 2 Page, using the steps described at the beginning of this section. 2) Press the MENU Key to display the selected page menu (Figure 9-84). Figure 9-84 COM Setup Page Menu 3) With 'Restore Defaults?' highlighted, press the ENT Key. Figure 9-83 Data Field Configuration Page w/Traffic 4) Press the small right knob to remove the cursor and return to the Setup 2 Page. NOTE: The 'Traffic' selection in the Auxiliary Configuration Field is only available if the GNC 420 is configured for interface with a traffic information device (see Section 11). 9-32 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K
![](/manual_guide/products/garmin-gnc-420w-pilots-guide-8f6f648/180.png)