Garmin GNC 420W Pilots Guide - Page 24

SECTION 1 INTRODUCTION Viewing additional information for a nearby airport: 1) Press the small right knob to activate the cursor. 2) Turn the large right knob to select the desired airport from the list. 3) Press the ENT Key to display waypoint (WPT) information pages for the selected airport (Figure 1-27). Selecting a nearby airport as a direct-to destination from the Nearest Airport Page: 1) Press the small right knob to activate the cursor. 2) Turn the large right knob to select the desired airport from the list. 3) Press the Direct-to Key. 4) Press the ENT Key twice to navigate to the nearby airport. Selecting a nearby airport as a direct-to destination from an Airport Information Page: 1) Press the Direct-to Key. 2) Press the ENT Key (Figure 1-28). Figure 1-27 Airport Location Page 4) To display runway and frequency information, press the small right knob to remove the cursor and turn the small right knob to display the desired information page. The Nearest Airport Page may be used in conjunction with the Direct-to Key to quickly set a course to a nearby facility in an in-flight emergency. Selecting a nearby airport as a direct-to destination overrides the flight plan or cancels a previously selected direct-to destination. (The pilot will still have the option of returning to the flight plan by cancelling the direct-to; see Section 4.1, Cancelling Direct-to Navigation.) Figure 1-28 'Activate?' Highlighted 3) Press the ENT Key again to navigate to the nearby airport. 1-16 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K