Garmin GNC 420W Pilots Guide - Page 132

SECTION 7 WPT PAGES User Waypoint List The User Waypoint List (Figure 7-49) allows the pilot to review, modify, rename, or delete a selected user waypoint, or to delete all user waypoints currently stored in memory. The top of the page shows the number of waypoints used and available memory. Renaming a user waypoint from the User Waypoint List: 1) Select the User Waypoint List, as described in this section. 2) Turn the large right knob to highlight the desired user waypoint. 3) Use the small and large right knobs to change the name of the user waypoint (Figure 7-50). Enter the new name directly over the old name. Press the ENT Key to accept the new name. Figure 7-49 User Waypoint List Page Reviewing and/or modifying a user waypoint from the User Waypoint List: 1) Select the User Waypoint List, as described in this section. 2) Turn the large right knob to highlight the desired user waypoint (Figure 7-49). 3) Press the ENT Key to display the User Waypoint Page for the selected waypoint. From this page the pilot may review all information defining the waypoint and its position. 4) To modify the waypoint's position or reference waypoint information, follow the steps described in this section. 5) To exit the User Waypoint Page, turn the large right knob to highlight 'Done?' and press the ENT Key. Figure 7-50 User Waypoint Name Selected 4) A 'rename waypoint' confirmation window is displayed (Figure 7-51). With 'Yes?' highlighted, press the ENT Key to rename the selected user waypoint. Figure 7-51 Rename Waypoint Window 7-22 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K