Garmin GPS 152 Owner's Manual - Page 21
Using the NAV/MOB Key
UPC - 753759028145
View all Garmin GPS 152 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Going to a Destination GPS is all about marking positions as waypoints and navigating to them using the receiver's steering guidance and map displays. You've already seen how to use the ENTER/MARK key to store our present position, so it's time to move on to the fun part-going to a destination. The NAV/MOB key, located on the left side of the keypad below the PAGE key, is the primary tool used to select a destination waypoint, a route to navigate, or start a TracBack. The NAV/MOB key can be used in three primary ways: • Pressing NAV/MOB once displays a list of options from which you can select 'Go To Waypoint', 'Follow Route', 'Follow Track', or 'Stop Navigation'. • Holding down NAV/MOB, or pressing the key two times, activates the MOB (Man OverBoard) feature. This marks the point at which the MOB was activated as a waypoint named "MOB" and also establishes it as an active "Go To" point. • Highlighting an on-screen waypoint, map feature or map location as a destination directly from the Map Page and pressing NAV/MOB allows you to graphically select points to "Go To". For the simulated trip, you're going to select a pre-programmed tour route using the first method. This will also show how the MENU key is used throughout the GPS 152 system to provide tab style options and functions. Start by changing the position to where the practice route is located. To change the GPS 152 position in simulator mode: 1. Press the MENU key twice to display the list of Main Menu tab items. 2. Use the UP or DOWN arrow of the ARROW KEYPAD to highlight the 'Sys' tab. 3. Highlight 'Set Options' in the lower right and press ENTER/MARK, then highlight 'Set Position' in the simulator setup window and press ENTER/MARK. 4. From the Initialize Position page, press the MENU key. With 'Enter As Text' highlighted, press ENTER/MARK. 5. On the Enter Position window, press ENTER/MARK then use the ARROW KEYPAD to enter N34°56.800', W076°24.066' and press ENTER/MARK when done. Getting Started Using the NAV/MOB Key Tabs System tab simulator setup options. Text entry for simulator position. 11