HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 101
snmp-agent packet max-size, snmp-agent remote
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
snmp-agent packet max-size Use snmp-agent packet max-size to set the maximum size (in bytes) of SNMP packets that the SNMP agent can receive or send. Use undo snmp-agent packet max-size to restore the default packet size. Syntax snmp-agent packet max-size byte-count undo snmp-agent packet max-size Default The SNMP agent can receive and send SNMP messages that are up to 1500 bytes long. Views System view Predefined user roles network-admin Parameters byte-count: Sets the maximum size (in bytes) of SNMP packets that the SNMP agent can receive or send. The value range is 484 to 17940. Usage guidelines If any device on the path to the NMS does not support packet fragmentation, limit the SNMP packet size to prevent large-sized packets from being discarded. For most networks, the default value is sufficient. Examples # Set the maximum SNMP packet size to 1024 bytes. system-view [Sysname] snmp-agent packet max-size 1024 snmp-agent remote Use snmp-agent remote to configure the SNMP engine ID of a remote SNMP entity. Use undo snmp-agent remote to delete a remote SNMP engine ID. Syntax snmp-agent remote { ip-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ] engineid engineid undo snmp-agent remote ip-address Default No remote SNMP engine ID has been configured. Views System view Predefined user roles network-admin 99