HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 78

A local user can use this command only after being authorized as the security log administrator by the system administrator. For more information about security log administrator, see Security Configuration Guide. Examples # Manually save the security logs in the security log file buffer into the security log file. security-logfile save The contents in the security log file buffer have been saved to the file flash:/seclog/seclog.log. terminal debugging Use terminal debugging to enable the display of debug information on the current terminal. Use undo terminal debugging to disable the display of debug information on the current terminal. Syntax terminal debugging undo terminal debugging Default The display of debug information is disabled on the current terminal. Views User view Predefined user roles network-admin Usage guidelines To view debug information, execute the terminal monitor and terminal debugging commands, enable the information center (enabled by default), and use a debugging command to enable the related debugging. The configuration of this command is only valid for the current connection between the terminal and the device. If a new connection is established, the default is restored. You can also execute the terminal logging level 7 command to enable the display of debug information on the current terminal. However, this command also enables the display of all other log information. Use a proper command as needed. Examples # Enable the display of debug information on the current terminal. terminal debugging The current terminal is enabled to display debugging information. Related commands • terminal logging level • terminal monitor 76