HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 149
sflow sampling-mode, Default, Views, Predefined user roles, Parameters, Examples, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
undo sflow flow max-header Default Flow sampling can copy up to 128 bytes of a packet. Views Ethernet interface view Predefined user roles network-admin Parameters length: Specifies the maximum number of bytes that can be copied, in the range of 18 to 512. HP recommends that you use the default. Examples # Set the maximum number of bytes that can be copied to 60 on Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] sflow flow max-header 60 sflow sampling-mode Use sflow sampling-mode to specify a flow sampling mode. Use undo sflow sampling-mode to restore the default. Syntax sflow sampling-mode { determine | random } undo sflow sampling-mode Default The sampling mode is random. Views Ethernet interface view Predefined user roles network-admin Parameters determine: Specifies the fixed sampling mode. For example, if the flow sampling interval is set to 4000 (by using the sflow sampling-rate command), the device randomly samples a packet, like the tenth packet, from the first 4000 packets. The next time the device samples the 4010th packet, and so on. At present, the determine sampling mode is not supported. random: Specifies the random sampling mode. For example, if the packet sampling interval is set to 4000, the device may sample one packet from the first 4000 packets, multiple packets from the next 4000 packets, and none from the third 4000 packets, randomly. But generally the device samples one packet from 4000 packets on the average. Examples # Specify fixed flow sampling mode on Ten-GigabitEthernet 1/1/5. 147