HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 148
sflow flow collector, sflow flow max-header, Views, Predefined user roles, Parameters, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Views Ethernet interface view Predefined user roles network-admin Parameters collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10. Examples # Specify sFlow collector 2 on Ten-GigabitEthernet 1/1/5 for counter sampling. system-view [Sysname] interface ten-gigabitethernet1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] sflow counter collector 2 sflow flow collector Use sflow flow collector to specify an sFlow collector for flow sampling. Use undo sflow flow collector to remove the sFlow collector for flow sampling. Syntax sflow flow collector collector-id undo sflow flow collector Default No sFlow collector is specified for flow sampling. Views Ethernet interface view Predefined user roles network-admin Parameters collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10. Examples # Specify sFlow collector 2 on Ten-GigabitEthernet 1/1/5 for flow sampling. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] sflow flow collector 2 sflow flow max-header Use sflow flow max-header to set the maximum number of bytes of a packet (starting from the packet header) that flow sampling can copy. Use undo sflow flow max-header to restore the default. Syntax sflow flow max-header length 146