HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 72
info-center security-logfile switch-directory, info-center source
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
info-center security-logfile switch-directory Use info-center security-logfile switch-directory to configure the directory where the security log file is saved. Syntax info-center security-logfile switch-directory dir-name Default The security log file is saved in the seclog directory under the root directory of the storage media. Views System view Predefined user roles security-audit Parameters dir-name: Specifies a directory by its name, a string of 1 to 64 characters. Usage guidelines The specified directory must have been created. The configuration made by this command cannot survive an IRF reboot or a master/subordinate switchover. Examples # Set the directory to save the security log file as flash:/test. mkdir test Creating directory flash:/test... Done. system-view [Sysname] info-center security-logfile switch-directory flash:/test info-center source Use info-center source to configure a log output rule for a module. Use undo info-center source to restore the default. Syntax info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor } { deny | level severity } undo info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor } Default The default output rules are listed in Table 18. 70