HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 17
NTP commands, display ntp-service ipv6 sessions
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NTP commands display ntp-service ipv6 sessions Use display ntp-service ipv6 sessions to display information about all IPv6 NTP associations. Syntax display ntp-service ipv6 sessions [ verbose ] Views Any view Predefined user roles network-admin network-operator Parameters verbose: Displays detailed information about all IPv6 NTP associations. If you do not specify this keyword, the command displays only brief information about the IPv6 NTP associations. Examples # Display brief information about all IPv6 NTP associations. display ntp-service ipv6 sessions Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured. Source: [125]3000::32 Reference: 127.127.1.0 Reachabilities: 1 Last receive time: 6 Roundtrip delay: 0.0 Clock stratum: 2 Poll interval: 64 Offset: -0.0 Dispersion: 0.0 Total sessions : 1 Table 5 Command output Field [12345] Source Description • 1-Clock source selected by the system (the current reference source). It has a system clock stratum level less than or equal to 15. • 2-The stratum level of the clock source is less than or equal to 15. • 3-The clock source has survived the clock selection algorithm. • 4-The clock source is a candidate clock source. • 5-The clock source was created by a command. IPv6 address of the NTP server. 15