HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 137
source ip
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Use undo source interface to restore the default. Syntax source interface interface-type interface-number undo source interface Default No source interface is configured for ICMP echo request packets. Views ICMP echo operation view Predefined user roles network-admin Parameters interface-type interface-number: Specifies an interface by its type and number. Usage guidelines If you configure both the source interface command and the source ip command, the source ip command takes effect. The specified source interface must be up. Otherwise, no ICMP echo requests can be sent out. Examples # Specify the IP address of interface VLAN-interface 2 as the source IP address of ICMP echo request packets. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] source interface vlan-interface 2 Related commands source ip source ip Use source ip to configure the source IP address for probe packets. Use undo source ip to remove the configured source address. The IP address of the interface that sends a probe packet serves as the source IP address of the probe packet. Syntax source ip ip-address undo source ip Default No source IP address is configured for probe packets. Views ICMP echo operation view, UDP echo operation view 135