HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 195
mirroring-group monitor-egress
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
[Sysname] mirroring-group 2 mirroring-port ten-gigabitethernet 1/1/6 both Related commands mirroring-group mirroring-group monitor-egress Use mirroring-group monitor-egress to configure an egress port for a remote source group. Use undo mirroring-group monitor-egress to remove the egress port of a remote source group. Syntax In system view: mirroring-group group-id monitor-egress interface-type interface-number undo mirroring-group group-id monitor-egress interface-type interface-number In interface view: mirroring-group group-id monitor-egress undo mirroring-group group-id monitor-egress Default No egress port is configured for a mirroring group. Views System view, interface view Predefined user roles network-admin Parameters group-id: Number of the mirroring group, in the range of 1 to 4. The mirroring group specified by group-id must already exist. interface-type interface-number: Specifies a port to be configured as the egress port by its type and number. Usage guidelines You can configure an egress port only for a remote source group, but not for a local mirroring group or remote destination group. To make sure port mirroring works properly, disable the following functions on the egress port: the spanning tree feature, 802.1X, IGMP snooping, static ARP, and MAC address learning. Do not configure a port of an existing mirroring group as an egress port. Examples # Create remote source group 1, and configure port Ten-GigabitEthernet 1/1/5 as its egress port in system view. system-view [Sysname] mirroring-group 1 remote-source [Sysname] mirroring-group 1 monitor-egress ten-gigabitethernet 1/1/5 # Create remote source group 2, and configure port Ten-GigabitEthernet 1/1/6 as its egress port in interface view. 193