HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 198
mirroring-group reflector-port
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
[Sysname] mirroring-group 2 monitor-port ten-gigabitethernet 1/1/6 Related commands mirroring-group mirroring-group reflector-port Use mirroring-group reflector-port to configure the reflector port for a remote source group. Use undo mirroring-group reflector-port to remove the reflector port of a remote source group. Syntax In system view: mirroring-group group-id reflector-port interface-type interface-number undo mirroring-group group-id reflector-port interface-type interface-number In interface view: mirroring-group group-id reflector-port undo mirroring-group group-id reflector-port Default No reflector port is configured for a mirroring group, and a port does not serve as the reflector port for a mirroring group. Views System view, interface view Predefined user roles network-admin Parameters group-id: Number of the mirroring group, in the range of 1 to 4. The mirroring group specified by group-id must already exist. interface-type interface-number: Specifies a port to be configured as the reflector port by its type and number. Usage guidelines You can configure reflector ports only for remote source groups but not for local mirroring groups or remote destination groups. Select a port not in use on the device to be configured as the reflector port. Do not connect a network cable to the reflector port. When a port is configured as a reflector port, all existing configuration of the port is cleared. You cannot configure other features on the reflector port. Examples # Create remote source group 1, and configure port Ten-GigabitEthernet 1/1/5 as its reflector port in system view. system-view [Sysname] mirroring-group 1 remote-source [Sysname] mirroring-group 1 reflector-port ten-gigabitethernet 1/1/5 196