HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 41
ntp-service max-dynamic-sessions, ntp-service multicast-client, Syntax, Default, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
• ntp-service authentication-keyid • ntp-service reliable authentication-keyid ntp-service max-dynamic-sessions Use ntp-service max-dynamic-sessions to set the maximum number of dynamic NTP sessions allowed to be established locally. Use undo ntp-service max-dynamic-sessions to restore the default. Syntax ntp-service max-dynamic-sessions number undo ntp-service max-dynamic-sessions Default The maximum number of dynamic NTP sessions is 100. View System view Predefined user roles network-admin Parameters number: Sets the maximum number of dynamic NTP associations allowed to be established, in the range of 0 to 100. Usage guidelines A single device can have a maximum of 128 concurrent associations, including static associations and dynamic associations. A static association refers to an association that a user has manually created by using an NTP command, while a dynamic association is a temporary association created by the system during operation. Examples # Set the maximum number of dynamic NTP associations allowed to be established to 50. system-view [Sysname] ntp-service max-dynamic-sessions 50 Related commands display ntp-service sessions ntp-service multicast-client Use ntp-service multicast-client to configure the device to operate in NTP multicast client mode and use the current interface to receive NTP multicast packets. Use undo ntp-service multicast-client to remove the configuration. Syntax ntp-service multicast-client [ ip-address ] undo ntp-service multicast-client [ ip-address ] 39