HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 35
ntp-service ipv6 inbound disable, ntp-service ipv6 multicast-client, Examples, Related commands
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
The ntp-service ipv6 acl command provides a minimum security method. NTP authentication is more secure. Examples # Configure the peer devices on subnet 2001::1 to have full access to the local device. system-view [Sysname] acl ipv6 number 2001 [Sysname-acl6-basic-2001] rule permit source 2001::1 64 [Sysname-acl6-basic-2001] quit [Sysname] ntp-service ipv6 peer acl 2001 Related commands • ntp-service authentication enable • ntp-service authentication-keyid • ntp-service reliable authentication-keyid ntp-service ipv6 inbound disable Use ntp-service ipv6 inbound disable to disable an interface from receiving IPv6 NTP messages. Use undo ntp-service ipv6 inbound disable to restore the default. Syntax ntp-service ipv6 inbound disable undo ntp-service ipv6 inbound disable Default All interfaces are enabled to receive IPv6 NTP messages. Views VLAN interface view Predefined user roles network-admin Usage guidelines To disable an interface on the device from synchronizing the peer devices in the corresponding subnet or disable the device from being synchronized by the peer devices in the subnet corresponding to an interface, execute the command on the interface. Examples # Disable VLAN-interface 1 from receiving IPv6 NTP messages. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] ntp-service ipv6 inbound disable ntp-service ipv6 multicast-client Use ntp-service ipv6 multicast-client to configure the device to operate in IPv6 NTP multicast client mode and use the current interface to receive IPv6 NTP multicast packets. 33