HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 68

info-center loghost source, Syntax, Default, Views, Predefined user roles, Parameters

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Syntax info-center loghost [ vpn-instance vpn-instance-name ] { ipv4-address | ipv6 ipv6-address } [ port port-number ] [ facility local-number ] undo info-center loghost [ vpn-instance vpn-instance-name ] { ipv4-address | ipv6 ipv6-address } Default No log host is specified. Views System view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If the log host is on the public network, do not specify this option. ipv4-address: Specifies the IPv4 address of a log host. ipv6 ipv6-address: Specifies the IPv6 address of a log host. port port-number: Specifies the port number of the log host, in the range of 1 to 65535. The default is 514. It must be the same as the value configured on the log host. Otherwise, the log host cannot receive system information. facility local-number: Specifies a logging facility from local0 to local7 for the log host. The default value is local7. Logging facilities are used to mark different logging sources, and query and filer logs. Usage guidelines The info-center loghost command takes effect only after information center is enabled with the info-center enable command. The device supports up to four log hosts. Examples # Output logs to the log host 1.1.1.1. system-view [Sysname] info-center loghost 1.1.1.1 info-center loghost source Use info-center loghost source to specify the source IP address for output logs. Use undo info-center loghost source to restore the default. Syntax info-center loghost source interface-type interface-number undo info-center loghost source Default The source IP address of output logs is the primary IP address of the matching route's egress interface. 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
66
Syntax
info-center loghost
[
vpn-instance
vpn-instance-name
] {
ipv4-address
|
ipv6
ipv6-address
}
[
port
port-number
] [
facility
local-number
]
undo info-center loghost
[
vpn-instance
vpn-instance-name
] {
ipv4-address
|
ipv6
ipv6-address
}
Default
No log host is specified.
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance
vpn-instance-name
: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If the log host is on the public network, do not specify this option.
ipv4-address
: Specifies the IPv4 address of a log host.
ipv6
ipv6-address
: Specifies the IPv6 address of a log host.
port
port-number
: Specifies the port number of the log host, in the range of 1 to 65535. The default is 514.
It must be the same as the value configured on the log host. Otherwise, the log host cannot receive system
information.
facility
local
-
number
: Specifies a logging facility from local0 to local7 for the log host. The default value
is local7. Logging facilities are used to mark different logging sources, and query and filer logs.
Usage guidelines
The
info-center loghost
command takes effect only after information center is enabled with the
info-center enable
command.
The device supports up to four log hosts.
Examples
# Output logs to the log host 1.1.1.1.
<Sysname> system-view
[Sysname] info-center loghost 1.1.1.1
info-center loghost source
Use
info-center loghost source
to specify the source IP address for output logs.
Use
undo info-center loghost source
to restore the default.
Syntax
info-center loghost source
interface-type interface-number
undo info-center loghost source
Default
The source IP address of output logs is the primary IP address of the matching route's egress interface.