HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 193
mirroring-group mirroring-port (interface view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
mirroring-group mirroring-port (interface view) Use mirroring-group mirroring-port to configure a source port for a mirroring port. Use undo mirroring-group mirroring-port to remove a source port from the mirroring group. Syntax mirroring-group group-id mirroring-port { both | inbound | outbound } undo mirroring-group group-id mirroring-port Default No source port is configured for any mirroring group. Views Interface view Predefined user roles network-admin Parameters group-id: Number of the mirroring group, in the range of 1 to 4. The mirroring group specified by the group-id argument must already exist. both: Mirrors both received and sent packets on the specified port. inbound: Mirrors only received packets on the specified port. outbound: Mirrors only sent packets on the specified port. Usage guidelines You can configure source ports only for a local mirroring group or remote source group but not for a remote destination group. Do not assign a source port to a remote probe VLAN. A port can serve as a source port for multiple mirroring groups, but the port cannot be a reflector port, egress port, or monitor port at the same time. Examples # Create local mirroring group 1, configure Ten-GigabitEthernet 1/1/5 as a source port of the mirroring group, and configure the mirroring group to monitor the bidirectional traffic of the port. system-view [Sysname] mirroring-group 1 local [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] mirroring-group 1 mirroring-port both # Create remote source group 2, configure Ten-GigabitEthernet 1/1/6 as a source port of the mirroring group, and configure the mirroring group to monitor the bidirectional traffic of the port. system-view [Sysname] mirroring-group 2 remote-source [Sysname] interface ten-gigabitethernet 1/1/6 [Sysname-Ten-GigabitEthernet1/1/6] mirroring-group 2 mirroring-port both Related commands mirroring-group 191