HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 33
ntp-service enable, ntp-service inbound disable, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Related commands ntp-service broadcast-client ntp-service enable Use ntp-service enable to enable the NTP service. Use undo ntp-service enable to disable the NTP service. Syntax ntp-service enable undo ntp-service enable Default The NTP service is not enabled. Views System view Predefined user roles network-admin Examples # Enable the NTP service. system-view [Sysname] ntp-service enable ntp-service inbound disable Use ntp-service inbound disable to disable an interface from receiving NTP messages. Use undo ntp-service inbound disable to restore the default. Syntax ntp-service inbound disable undo ntp-service inbound disable Default All interfaces are enabled to receive NTP messages. Views VLAN interface view Predefined user roles network-admin Usage guidelines To disable an interface on the device from synchronizing the peer device in the corresponding subnet or disable the device from being synchronized by the peer device in the subnet corresponding to an interface, execute the command on the interface to disable the interface from receiving NTP messages. 31