HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 106
Default, Views, Predefined user roles, Parameters, Specifies SNMPv2c.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
undo snmp-agent target-host { trap | inform } address udp-domain { ip-address | ipv6 ipv6-address } params securityname security-string [ vpn-instance vpn-instance-name ] In FIPS mode: snmp-agent target-host inform address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3 { authentication | privacy } snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3 { authentication | privacy } undo snmp-agent target-host { trap | inform } address udp-domain { ip-address | ipv6 ipv6-address } params securityname security-string [ vpn-instance vpn-instance-name ] Default No SNMP notification target host has been configured. Views System view Predefined user roles network-admin Parameters inform: Sends notifications as informs. trap: Sends notifications as traps. address: Specifies the destination address of SNMP notifications. udp-domain: Specifies UDP as the transport protocol. ip-address: Specifies the IPv4 address of the target host as the destination of SNMP notifications. ipv6 ipv6-address: Specifies the IPv6 address of the target host as the destination of SNMP notifications. udp-port port-number: Specifies the UDP port for SNMP notifications. If no UDP port is specified, UDP port 162 is used. vpn-instance vpn-instance-name: Specifies the VPN for the target host. The vpn-instance-name argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters. If this parameter is not specified, the target host is in public network. params securityname security-string: Specifies the authentication parameter. The security-string argument specifies an SNMPv1 or SNMPv2c community name or an SNMPv3 username, a string of 1 to 32 characters. v1: Specifies SNMPv1. v2c: Specifies SNMPv2c. v3: Specifies SNMPv3. • authentication: Specifies the security model to be authentication without privacy. You must specify the authentication key when you create the SNMPv3 user. • privacy: Specifies the security model to be authentication with privacy. You must specify the authentication key and privacy key when you create the SNMPv3 user. 104