HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 138
source port
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Predefined user roles network-admin Parameters ip-address: Specifies the source IP address of the operation. Usage guidelines If you configure both the source interface command and the source ip command, the source ip command takes effect. If you configure the source interface command but not the source ip command for the ICMP echo operation, the IP address of the source interface serves as the source IP address of the probe packet. The specified source IP address must be the IP address of a local interface. The local interface must be up. Otherwise, no probe packets can be sent out. Examples # Configure the source IP address for ICMP echo request packets as 10.1.1.1. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] source ip 10.1.1.1 Related commands source interface source port Use source port to configure the source port for probe packets. Use undo source port to remove the configured port number. Syntax source port port-number undo source port Default No source port number is configured for probe packets. Views UDP echo operation view Predefined user roles network-admin Parameters port-number: Specifies the source port number, in the range of 1 to 65535. Examples # Configure port 8000 as the source port for probe packets in the UDP echo operation. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type udp-echo 136