HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 129
nqa, nqa agent enable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
nqa Use nqa to create an NQA operation and enter its view. Use undo nqa to remove the operation. Syntax nqa entry admin-name operation-tag undo nqa { all | entry admin-name operation-tag } Default No NQA operation is created. Views System view Predefined user roles network-admin Parameters admin-name: Specifies the name of the administrator who creates the NQA operation, a case-insensitive string of 1 to 32 characters excluding hyphens (-). operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters excluding hyphens (-). all: Removes all NQA operations. Usage guidelines If the operation type has been configured for the operation, this command directly places you to NQA operation view. After you configure the scheduling parameters for the operation, you cannot enter NQA operation view or any operation type view. You cannot deploy any NQA operation related parameters through IMC either. To modify the operation settings, you must first stop the operation. Examples # Create an NQA operation with administrator name admin and operation tag test, and enter NQA operation view. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] nqa agent enable Use nqa agent enable to enable the NQA client. Use undo nqa agent enable to disable the NQA client and stop all operations being performed. Syntax nqa agent enable undo nqa agent enable 127