HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Com - Page 140
statistics max-group, tos
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Parameters interval: Specifies the interval in minutes, in the range of 1 to 35791394. Usage guidelines NQA collects statistics for operations completed within a specific period. The statistics form a statistics group. To view information about the statistics groups, use the display nqa statistics command. Examples # Configure the system to collect the ICMP echo operation statistics at 2-minute intervals. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] statistics interval 2 statistics max-group Use statistics max-group to configure the maximum number of statistics groups that can be saved. Use undo statistics max-group to restore the default. Syntax statistics max-group number undo statistics max-group Default A maximum of two statistics groups can be saved. Views ICMP echo operation view, UDP echo operation view Predefined user roles network-admin Parameters number: Specifies the maximum number of statistics groups, in the range of 0 to 100. To disable statistics collection, set the value to 0. Usage guidelines When the maximum number of statistics groups is reached and a new statistics group is to be saved, the earliest statistics group is deleted. Examples # Configure the NQA to save up to 5 statistics groups for the ICMP operation. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] statistics max-group 5 tos Use tos to specify the ToS value in the IP packet header of probe packets. 138