HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Con - Page 121
Configuration procedure, Verifying the configuration, Network diagram
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Figure 35 Network diagram Marketing dept. Device Technical dept. XGE1/1/5 XGE1/1/7 XGE1/1/6 Server Source port Monitor port Configuration procedure # Create local mirroring group 1. system-view [Device] mirroring-group 1 local # Configure Ten-GigabitEthernet 1/1/5 and Ten-GigabitEthernet 1/1/6 as source ports and port Ten-GigabitEthernet 1/1/7 as the monitor port for local mirroring group 1. [Device] mirroring-group 1 mirroring-port ten-gigabitethernet 1/1/5 ten-gigabitethernet 1/1/6 both [Device] mirroring-group 1 monitor-port ten-gigabitethernet 1/1/7 # Disable the spanning tree feature on the monitor port Ten-GigabitEthernet 1/1/7. [Device] interface ten-gigabitethernet 1/1/7 [Device-Ten-GigabitEthernet1/1/7] undo stp enable [Device-Ten-GigabitEthernet1/1/7] quit Verifying the configuration # Display information about all mirroring groups. [Device] display mirroring-group all Mirroring group 1: Type: Local Status: Active Mirroring port: Ten-GigabitEthernet1/1/5 Both Ten-GigabitEthernet1/1/6 Both Monitor port: Ten-GigabitEthernet1/1/7 After the configurations are completed, you can monitor all the packets received and sent by the marketing department and the technical department on the server. 115