HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Con - Page 57
Display SNTP association information for Device B., Enable SNTP authentication on Device B.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
# Configure an NTP authentication key, with the key ID of 10 and key value of aNiceKey. Input the key in plain text. [DeviceA] ntp-service authentication-keyid 10 authentication-mode md5 simple aNiceKey # Specify the key as a trusted key. [DeviceA] ntp-service reliable authentication-keyid 10 3. Configure Device B: # Enable the SNTP service. system-view [DeviceB] sntp enable # Enable SNTP authentication on Device B. [DeviceB] sntp authentication enable # Configure an SNTP authentication key, with the key ID of 10 and key value of aNiceKey. Input the key in plain text. [DeviceB] sntp authentication-keyid 10 authentication-mode md5 simple aNiceKey # Specify the key as a trusted key. [DeviceB] sntp reliable authentication-keyid 10 # Specify Device A as the NTP server of Device B, and associate the server with key 10. [DeviceB] sntp unicast-server 1.0.1.11 authentication-keyid 10 4. Verify the configuration: # Display SNTP association information for Device B. [DeviceB] display sntp sessions NTP server Stratum Version Last receive time 1.0.1.11 2 4 Tue, May 17 2011 9:11:20.833 (Synced) The output shows that an association has been established between Device B and Device A, and Device B has been synchronized to Device A. 51