HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Con - Page 30
con it
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Step Command Remarks 3. Configure an NTP authentication key. ntp-service authentication-keyid keyid authentication-mode md5 { cipher | simple } value By default, no NTP authentication key is configured. 4. Configure the key as a trusted ntp-service reliable key. authentication-keyid keyid By default, no authentication key is configured as a trusted key. 5. Enter VLAN interface view. interface interface-type interface-number N/A 6. Associate the specified key with the multicast server. • Associate the specified key with a multicast server: ntp-service multicast-server [ ip-address ] authentication-keyid keyid • Associate the specified key with an IPv6 multicast server: By default, no multicast server is associated with the specified key. ntp-service ipv6 multicast-server ipv6-multicast-address authentication-keyid keyid NTP authentication results differ when different configurations are performed on broadcast client and server. For more information, see Table 5. (N/A in the table means that whether the configuration is performed does not make any difference.) Table 5 NTP authentication results Multicast server Enable NTP authentic ation Configure a key and configure it as a trusted key Yes Yes Yes Yes Yes Yes Yes No Associate the key with a multicast server Yes Yes Yes Yes Multicast client Enable NTP authenticatio n Configure a key and configure it as a trusted key Yes Yes Yes No No N/A Yes N/A Authentication result Succeeded. NTP messages can be sent and received properly. Failed. NTP messages cannot be sent and received properly. Failed. NTP messages cannot be sent and received properly. Failed. NTP messages cannot be sent and received properly. 24