HP 6125XLG R2306-HP 6125XLG Blade Switch Network Management and Monitoring Con - Page 29
Configuring NTP authentication in multicast mode, Authentication result
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Broadcast server Enable NTP authentic ation Configure a key and configure it as a trusted key Yes No Yes N/A Yes N/A No N/A No N/A Broadcast client Associate the key with a broadcast server Enable NTP authenticati on Configure a key and configure it as a trusted key Yes No N/A No Yes N/A No No N/A N/A Yes N/A N/A No N/A Authentication result No authentication. NTP messages can be sent and received properly. Failed. NTP messages cannot be sent and received properly. No authentication. NTP messages can be sent and received properly. Failed. NTP messages cannot be sent and received properly. No authentication. NTP messages can be sent and received properly. Configuring NTP authentication in multicast mode When you configure NTP authentication in multicast mode, enable NTP authentication, configure an authentication key, set the key as a trusted key on both the multicast client and server, and configure an NTP authentication key on the multicast server. The key IDs and key values configured on the multicast server and client must be the same. Otherwise, NTP authentication fails. To configure NTP authentication for a multicast client: Step 1. Enter system view. Command system-view 2. Enable NTP authentication. ntp-service authentication enable 3. Configure an NTP authentication key. ntp-service authentication-keyid keyid authentication-mode md5 { cipher | simple } value 4. Configure the key as a trusted ntp-service reliable key. authentication-keyid keyid Remarks N/A By default, NTP authentication is disabled. By default, no NTP authentication key is configured. By default, no authentication key is configured as a trusted key. To configure NTP authentication for a multicast server: Step 1. Enter system view. 2. Enable NTP authentication. Command system-view ntp-service authentication enable Remarks N/A By default, NTP authentication is disabled. 23