HP Deskjet 6940 User Guide - Pre-Windows 2000 - Page 89

Set the auto-off feature, Align the print cartridges, Configuration - power consumption

Get HP Deskjet 6940 PDF manuals and user guides
UPC - 882780263406
View all HP Deskjet 6940 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

8. Push down on the print cartridge latch until it snaps closed. 9. Close the printer cover. The printer automatically prints a calibration page. For information about storing print cartridges, see Maintain print cartridges. For information about recycling empty print cartridges, see Print cartridge recovery. Warning Keep both new and used print cartridges out of the reach of children. Set the auto-off feature The printer is designed with an auto-off feature that automatically places the printer into a low power mode when it has been idle for 30 minutes. In this mode, the printer continues to consume a maximum 3.0 watts of power and turns back on automatically when print jobs are sent to the printer. You can manually turn the printer off by pressing and holding the Power button for three seconds. When the printer is manually turned off, the printer uses less than one watt of power. Manually powering off the printer is recommended if the printer causes interference with other wireless devices, or if you do not plan to use the printer for a long period of time. Selecting auto-off cancels the FEMP energy savings mode. Energy consumption can be prevented by turning the printer power off, and then disconnecting the end of the printer power cord from the electrical source. Follow these steps to activate the auto-off feature: 1. Open the printer Toolbox. 2. Click the Configuration tab. 3. Select Activate the Hardware Auto-off feature. 4. Click Apply, and then click OK. Align the print cartridges The printer automatically aligns the print cartridges after a new print cartridge is installed. You can also align the print cartridges at other times to ensure optimal print quality. To align print cartridges: User's guide 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
8.
Push down on the print cartridge latch until it snaps closed.
9.
Close the printer cover.
The printer automatically prints a calibration page.
For information about storing print cartridges, see
Maintain print cartridges
.
For information about recycling empty print cartridges, see
Print cartridge recovery
.
Warning
Keep both new and used print cartridges out of the reach of children.
Set the auto-off feature
The printer is designed with an auto-off feature that automatically places the printer into
a low power mode when it has been idle for 30 minutes. In this mode, the printer continues
to consume a maximum 3.0 watts of power and turns back on automatically when print
jobs are sent to the printer. You can manually turn the printer off by pressing and holding
the
Power button
for three seconds. When the printer is manually turned off, the printer
uses less than one watt of power. Manually powering off the printer is recommended if
the printer causes interference with other wireless devices, or if you do not plan to use
the printer for a long period of time.
Selecting auto-off cancels the
FEMP
energy savings mode.
Energy consumption can be prevented by turning the printer power off, and then
disconnecting the end of the printer power cord from the electrical source.
Follow these steps to activate the auto-off feature:
1.
Open the printer
Toolbox
.
2.
Click the
Configuration
tab.
3.
Select
Activate the Hardware Auto-off feature
.
4.
Click
Apply
, and then click
OK
.
Align the print cartridges
The printer automatically aligns the print cartridges after a new print cartridge is installed.
You can also align the print cartridges at other times to ensure optimal print quality.
To align print cartridges:
User's guide
87