HP LaserJet M1319 HP LaserJet M1319 MFP Series - Software Technical Reference - Page 182

Paper and print media ● Understand paper and print media use ● Supported paper and print media sizes ● Special paper or print media guidelines ● Load paper and print media ● Configure trays ● Media sources and destinations Understand paper and print media use This product supports a variety of paper and other print media. Paper or print media that does not meet guidelines might cause the following problems: ● Poor print quality ● Increased jams ● Premature wear on the product, requiring repair For best results, use only HP-brand paper and print media designed for laser printers. Do not use paper or print media made for inkjet printers. Hewlett-Packard Company cannot recommend the use of other brands of media because HP cannot control their quality. It is possible for paper to meet all of the guidelines and still not produce satisfactory results. This might be the result of improper handling, unacceptable temperature and/or humidity levels, or other variables over which Hewlett-Packard has no control. CAUTION: Using paper or print media that does not meet Hewlett-Packard's specifications might cause problems for the product, requiring repair. This repair is not covered by the Hewlett-Packard warranty or service agreements. CAUTION: To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF. Supported paper and print media sizes This product supports a number of paper sizes, and it adapts to various media. NOTE: To obtain best print results, select the appropriate paper size and type in the printer driver before printing. Table 6-1 Supported paper and print media sizes Size Dimensions Priority input tray Tray 1 Letter 216 x 279 mm (8.5 x 11 inches) Legal 216 x 356 mm (8.5 x 14 inches) A4 210 x 297 mm (8.27 x 11.69 inches) 166 Chapter 6 Engineering details ENWW