HP LaserJet M1319 HP LaserJet M1319 MFP Series - Software Technical Reference - Page 64

NOTE: Many of the options in the drop-down menus control the same features that are available by using the TWAIN user interface tabs and buttons. ● Scan. This drop-down menu contains the following options: ◦ New Scan. Use this option to rescan the image. Flatbed previews are always at 75 dpi and in color. ◦ Accept. Use this option to rescan the image if the original is on a flatbed scanner and then send the image back to a program with the specified settings. ◦ Exit. Use this option to exit the HP LaserJet Scan software. ● Basic. This drop-down menu contains the following options: ◦ Rotate. Use this option to rotate the scanned image 90° to the left or 90° to the right. ◦ Zoom. Use this option to zoom in or out on the selected area of the scan. This automatically starts a rescan if one is needed to obtain a clear image. ◦ Resize. Use this option to change the selection area for final scan. The final scan is performed within this selection area. ◦ Lighten/Darken. Use this option to lighten or darken the scanned image. ◦ Reset Tools. Use this option to reset all the controls to their default values. ● Advanced. This drop-down menu contains the following options: ◦ Resolution. Use this option to designate the final resolution for the image. The software interpolates resolutions that are above 1200 dpi. ◦ B/W Threshold. Use this option to adjust the black and white threshold, and to specify which color channel is used for the scan. ◦ Mirror. Use this option to flip the scanned image horizontally. ◦ Invert Colors. Use this option to invert the colors in the scanned image. ◦ Color Adjustment. Use option tab to adjust the color on the scanned image. ● Output Type. This drop-down menu contains the following options: ◦ Millions of Colors (default) ◦ 256 Colors (8 bit) ◦ 256 Colors (web palette) ◦ 256 Colors (system palette) ◦ 256 Gray Shades ◦ Black White (1 bit) 48 Chapter 2 Software description ENWW